HUSQVARNA MADSAW DIELECTRIC POLE SAW 525DEPS

THE FIRST AND ONLY DIELECTRIC GAS-POWERED POLE SAW

Enhanced operator safety

• Dielectric gas-powered pole saw
• Individually tested to meet OSHA 1910.269
• Adjustable and ergonomic components reduce fatigue

Revolutionary versatility

• Designed for use on the ground, in the bucket, and in the tree
• More productive than a manual saw
• More useful than a hydraulic saw
• Includes both 9′ and 12.5′ assemblies

Unmatched storability

• Quick disconnect
• Compact segments allow for secure storage

Raising the bar for safety, performance, and storage

  • Husqvarna 525DEPS MADSAW

    Pole Saws

    Husqvarna’s 525DEPS MADSAW dielectric pole saw for professionals in the utility and tree care industry. As the industry’s first and only dielectric gas-powered pole saw that is individually tested to meet OSHA 1910.269, the MADSAW provides an extra measure of safety for skilled linemen, utility workers, and tree care professionals. for extreme versatility, the MADSAW can be used in the bucket, in the tree, or on the ground. The purposeful design allows the pole saw’s sections to quickly disconnect for secure storage in a tree care truck or bucket truck. More productive than a manual saw and more useful than a hydraulic unit, the MADSAW makes limbing and pruning projects more efficient than ever before.

    • Cylinder displacement: 25.4 cm³
    • Power output: 1.36 hp
    • Length, extended, including cutting equipment: 150 in
     
  • Husqvarna 525DEPS MADSAW Storage Bag

    Bags

    the Husqvarna 525DEPS MADSAW is easily transported and stored in the storage bag. The bag is designed to store the dielectric segment and extension shafts to maintain integrity of the fiberglass segment. The exterior pouch with button snaps allows for extra storage.

  • Boom Mount, Bar Side

    Attachments

    Boom Mount (Bar-Side Only) is designed specifically for the Husqvarna 525DEPS MADSAW with rubber trim for bar/chain oil reservoir protection and high-quality fiberglass construction and ratchet straps for durability. The boom mount is designed for both square or round booms. Must order both bar-side mounts and engine-side to have a complete mount.

  • Boom Mount, Engine Side

    Attachments

    Boom Mount (Engine-Side Only) is designed specifically for the Husqvarna 525DEPS MADSAW with rubber trim for bar/chain oil reservoir protection and high-quality fiberglass construction and ratchet straps for durability. The boom mount is designed for both square or round booms. Must order both bar-side mounts and engine-side to have a complete mount.

  • Other MADSAW Features

    • Lightweight 12″ cutting bar with X-Cut chain (3/8″ mini-pitch, .050 gauge)
    • Includes both 9 ft and 12.5 ft. optional lengths
    • Custom-fit couplers
    • Automatic chain lubrication
    • Dielectric fiberglass sections meet OSHA 1910.269 standards
    • Removable harness hook
    • Adjustable rubber safety barrier
    • Aluminum caps, shaft seals, and sealed ball bearings provide durability in all-weather
    • The throttle guard protects the users hands and prevents unintended throttle pressing
    • LowVib technology reduces vibrations
    • Tether point
  • All Accessories

    • X-Guard Dielectric Bar & Chain Oil – Constructed for use in tools that are tested to meet OSHA 1910.269.
    • Harness Balance Flex – Fits all kinds of pole products and is attached to the machine by open hooks, making it easy to use and quick to start/stop.
    • X-Cut® S93G Chain – Gives the user excellent precision and performance in tight spaces, making it perfect for professional tree care and utility work.
    • 12-in Guide Bar – is a Durable chainsaw guide bar designed for high-performance pruning work.
    • Boom Mount, Engine Side – Attaches boom to pole saw for improved versatility and capability.
    • Boom Mount, Bar Side – Attaches boom to pole saw for improved versatility and capability.
    • Storage Bag – Made of durable materials with multiple sections for secure and safe storage.


THE first and only dielectric gas-powered pole saw


Husqvarna, one of the world’s leading manufacturers of innovative professional tree care products, has launched the 525DEPS MADSAW. MAD standing for OSHA’s Minimal Approach Distances, a term used often in the utility industry. Minimal Approach Distances is an OSHA standard for electric power generation, transmission, and distribution (OSHA 1910.269). The product is revolutionary to the utility industry because the Husqvarna MADSAW is a dielectric pole saw, meaning it resists transmitting electric force through conduction which insulates the user against shock under 36,000 volts or less.

HUSQVARNA MADSAW Uses


The purpose of the MADSAW is to enhanced safety for tree care and utility professionals by utilizing the nonconductive properties and extended length of the MADSAW. Linemen can work more efficiently while staying further from the line of fire and strike zone. A lineman can use the MADSAW from their bucket, in a tee, or on the ground, offering users versatility to adapt in any environment. The two available lengths (9’ and 12.5’) make it easier for linemen to work on hard-to-reach areas, reducing the amount of time climbing and repositioning. The MADSAW offers linemen an alternative to cumbersome hydraulic equipment and inefficient manual pruning making line clearance tasks easier than ever before.

The next generation of cutting excellence from Husqvarna. 

Click on the circles on the image below to learn more about the MADSAW’s innovative features.

LIGHTWEIGHT 12″ CUTTING BAR

12-in cutting bar features a X-Cut® chain (3/8-in, mini pitch, .050 gauge) to deliver the same robust performance as Husqvarna’s professional tree care chainsaw models.

CUSTOM COUPLERS

The custom-fit couplers connecting the pole saw’s sections can be loosened or tightened down for quick and easy assembly and storage in the specially designed, durable carrying bag (included).

DIELECTRIC SECTION

Made from dielectric lightweight fiberglass to meet OSHA 1910.269. Label verifies individual testing by third party. Can be easily attached to pole saw sections to form 9-ft or 12.5-ft configurations.

REMOVABLE HARNESS HOOK

Harness hook easily attaches to harness strap worn by the operator to optimize comfort and reduce strain on the arms and shoulders during extended cutting tasks.

ALUMINUM CAPS

The pole saw’s shaft seals and sealed bearings are designed for all-weather durability, preventing deterioration and ensuring a long and productive product life.

CHAIN LUBRICATION

Automatic chain lubrication can be easily adjusted to increase or decrease the volume of Husqvarna’s recommended dielectric bar and chain oil flowing to the cutting bar during operation.

RUBBER SAFETY BARRIER

Rubber reach barrier is fixed tightly to pole saw for long-lasting effectiveness, but can adjusted and positioned according to the desired reach of the operator.

THROTTLE GUARD

Ergonomically designed throttle guard is positioned to both protect the operator’s hands during cutting tasks, as well as and prevent any unintended presses of the throttle.

LOW VIB™

LowVib™ technology reduces fatigue and dampens vibrations with exclusive rubber isolation that prevents vibrations from going into the operator’s arms.

TETHER POINT

Pole saw has a durable tether point.

525 SERIES POWERHEAD

Delivers proven performance and reliability trusted by industry professionals. Features a powerful 25-cc, 2-stroke engine with tool-less air filter removal for on-the-go maintenance.
  • LIGHTWEIGHT 12″ CUTTING BAR

    12-in cutting bar features a X-Cut® chain (3/8-in, mini pitch, .050 gauge) to deliver the same robust performance as Husqvarna’s professional tree care chainsaw models.
  • CUSTOM COUPLERS

    The custom-fit couplers connecting the pole saw’s sections can be loosened or tightened down for quick and easy assembly and storage in the specially designed, durable carrying bag (included).
  • DIELECTRIC SECTION

    Made from dielectric lightweight fiberglass to meet OSHA 1910.269. Label verifies individual testing by third party. Can be easily attached to pole saw sections to form 9-ft or 12.5-ft configurations.
  • REMOVABLE HARNESS HOOK

    Harness hook easily attaches to harness strap worn by the operator to optimize comfort and reduce strain on the arms and shoulders during extended cutting tasks.
  • ALUMINUM CAPS

    The pole saw’s shaft seals and sealed bearings are designed for all-weather durability, preventing deterioration and ensuring a long and productive product life.
  • CHAIN LUBRICATION

    Automatic chain lubrication can be easily adjusted to increase or decrease the volume of Husqvarna’s recommended dielectric bar and chain oil flowing to the cutting bar during operation.
  • RUBBER SAFETY BARRIER

    Rubber reach barrier is fixed tightly to pole saw for long-lasting effectiveness, but can adjusted and positioned according to the desired reach of the operator.
  • THROTTLE GUARD

    Ergonomically designed throttle guard is positioned to both protect the operator’s hands during cutting tasks, as well as and prevent any unintended presses of the throttle.
  • LOW VIB™

    LowVib™ technology reduces fatigue and dampens vibrations with exclusive rubber isolation that prevents vibrations from going into the operator’s arms.
  • TETHER POINT

    Pole saw has a durable tether point.
  • 525 SERIES POWERHEAD

    Delivers proven performance and reliability trusted by industry professionals. Features a powerful 25-cc, 2-stroke engine with tool-less air filter removal for on-the-go maintenance.

features

Included with the saw is Husqvarna’s 525 powerhead, a trusted 25cc 2-stroke engine with 1.34 HP and X-Torq. The MADSAW engine ensures high performance and reliability. The aluminum couples with sealed bearings and shaft seals are ideal for all weather conditions. Safety enhancements include a LowVib, Husqvarna’s unique vibration-reducing technology which incorporates rubber isolation to reduce the vibrations transmitted to the user and a movable rubber barrier, which operators can modify according to their desired reach area.

Storage

The MADSAW offers superior storability. The purposefully designed dielectric midsection can disconnect from the powerhead and cutting head, giving the user the option to store the tool securely, in multiple locations in the bucket truck.

MADSAW BAG

includes 9 ft and 12.5 ft. optional lengths

9′

12.5′

MADSAW features

Want to take a closer look? Learn more about the MADSAW by exploring its features and design.

Meets OSHA 1910.269

Individually tested to meet OSHA standard 1910.269

Toolless couplers

Equipped with toolless couplers for quick assembly and easy storage.

Multiple lengths

The product includes both 9′ and 12.5′ length options for high flexibility.

Tether point

Shall the operator decide to tether the MADSAW, a tether point is attached at the rear.

Specifications 

If you still have questions reach out to a Divergent Alliance Specialist!

Engine

Cylinder displacement: 25.4 cm³
Power output: 1.36 hp
Maximum power speed: 8500 rpm
Fuel tank volume: 17.25 fl oz
Idling speed: 3000 rpm
Spark plug: NGK BPMR8Y

Dimensions

Weight (excl. cutting equipment): 16.4 lbs
Length, extended, including cutting equipment: 150 in

 Sound and Noise

Sound pressure level at operators ear: 91 dB(A)
Sound power level, guaranteed (LWA): 111 dB(A)

Vibration

Equivalent vibration level,(ahv, eq), front handle, collapsed: 7.49 m/s²
Equivalent vibration level,(ahv, eq), rear handle, collapsed: 10.00 m/s²
Equivalent vibration level,(ahv, eq), front handle, extended: 7.49 m/s²
Equivalent vibration level,(ahv, eq), rear handle, extended: 10.00 m/s²

TALK TO A PROFESSIONAL AT DIVERGENT ALLIANCE


Divergent Alliance

 

Products


2021 © Divergent Alliance, LLC - All Rights Reserved.

Call (847) 531-0559